The Adventurers Beginner Guide: Party Roles, Town Prep, and First Contracts

A six-member party traveling between towns on the world map in The Adventurers

A new class is not automatically an upgrade in The Adventurers. A tavern recruit enters the party at the Stranger relationship rank, while the original group begins as friends. That difference matters in combat because every class supplies a different adjacency bonus, and the value of that bonus grows with the relationship between the two characters.

The reliable early-game plan is therefore not “hire every class” or “buy the highest-quality weapon.” It is a loop: give each adventurer one clear combat job, buy only the supplies that protect those jobs, take a contract the group can finish, and use the result to improve one town and the relationships inside the party. This guide explains that loop for the 1.0 release without freezing a single build or balance percentage.

Build four jobs before collecting classes

Start with jobs that describe what must happen during a bad round. You need someone who can remain exposed, someone who can restore or protect the party, someone who can interrupt a dangerous enemy, and someone who can turn the safe opening into damage. A class may cover more than one job, but no job should exist only in your imagination.

  • Anchor: a Warrior can pull attention, reduce incoming damage, protect nearby allies, and recover with Second Wind; a Paladin can combine pressure with protection and targeted healing. The anchor is the character you are willing to leave in the most contested tile.
  • Sustain: a Cleric offers direct and group healing, temporary health, and later emergency restoration. A Druid leans toward healing over time, summons, roots, and damage-reducing effects. Choose according to whether your losses arrive as one sharp hit or as pressure across several rounds.
  • Control: Archers can pin, stun, or put a target to sleep; Wizards can freeze, blind, and hit clustered targets; Thieves can stop movement and manipulate target pressure. Control is successful when it prevents the next harmful action, not merely when its icon is available.
  • Conversion: this role turns setup into a kill. A Wizard can punish a cluster, a Thief can exploit an exposed target, a Warlock can amplify damage or add summoned bodies, and an Archer can deliver focused ranged pressure. The right choice depends on the resistances and space in the current fight.

Test the roster by imagining two failures. First, the anchor is pinned and cannot reach the threat. Who can remove, bypass, or compensate for that state? Second, the healer begins the round low on energy. Who can prevent enough damage to buy a recovery round? If both answers are “the same character,” the party has a single point of failure.

Read attributes as permission for a weapon and a workload

The six attributes are not interchangeable score increases. Strength supports bash and slash damage. Agility supports pierce damage and contributes to block and parry. Resolve governs energy and magical damage. Vitality supplies health and helps energy recovery. Charisma affects speech events and store prices through the highest-Charisma member in the party. Luck influences critical chance and search events.

Use those links to reject bad equipment decisions. A nominally stronger pierce weapon does not solve the problem of a low-Agility user. Heavy armor that adds an energy burden can undermine a character whose plan depends on repeated spells or bonus abilities. A magical damage dealer who cannot sustain energy needs a recovery answer before another offensive skill.

Check the live stat and item tooltips after equipping, not only the item name. The 1.0 patch changed Agility’s defensive contribution and increased Resolve’s magic-damage contribution. That launch-day rebalance is the reason this guide does not preserve a universal point spread. Verify the resulting damage, defenses, energy, and penalties in the current client.

General and Warlock ability choices arranged by level in The Adventurers
General and class abilities compete for a limited plan. Choose the action that fixes a known turn, then check that the character can afford its energy and positioning requirements.

Choose an ability only after naming the turn it fixes

The ability screen distinguishes actions, bonus abilities, passives, triggers, and area influences. That label is part of the build. Two impressive actions can compete for the same turn, while a bonus or passive may improve the default attack without taking its place. Before selecting an ability, finish this sentence: “I use this when ___ happens, so that ___ can act next.”

For a first campaign, the broad General pool is often more valuable than another narrow damage button:

  • Scout reveals enemy resistances and additional event information for the team. Only one party member needs to carry the role, so duplicating it does not solve another weakness.
  • Quick Breaths or Never Tired addresses a character who repeatedly opens or re-enters combat without enough energy to do their job.
  • Hard To Kill, Sanctified Core, or another survival passive buys time when the problem is a collapse, not low damage.
  • Merchant, Born Leader, and Herbalist move value outside combat. Take one because it serves the campaign loop, not because every member needs an economy perk.

Class skills should then solve the next layer. Pin or Freeze Target handles movement. Come At Me or Righteous Command controls pressure. Mend Wounds, Warm Embrace, and Lay On Hands give different forms of sustain. Hex Of Weakness, Mark, Wither, and similar effects create a damage window. Do not spend every pick on finishing moves when no one can create or survive that window.

Let relationships decide the formation

Adjacent allies receive a class-specific benefit, and the relationship rank controls its strength. The current developer guide lists nine relationship states from Rival through Cherished. A newly hired Stranger therefore changes the formation even if their class is ideal on paper. Hover the relationship effect in the 1.0 combat UI; the launch patch added a visible readout for the actual bonus.

Class providing the adjacency effect Benefit to the adjacent ally Practical placement question
Archer Critical chance Which reliable attacker can safely remain beside the Archer?
Cleric Healing received Who is expected to absorb the most recoverable damage?
Druid Energy recovered Which caster or control unit is most limited by energy?
Paladin Parry Which exposed melee ally benefits from another defensive layer?
Thief Hit chance Whose high-value attack is least useful when it misses?
Warlock Magic resistance Who must stay functional against magical pressure?
Warrior Reduced damage Which neighbor cannot afford to take the next full hit?
Wizard Damage Which ally already has a safe, repeatable way to attack?

Do not force a permanent cluster to preserve every bonus. Area attacks, difficult terrain, enemy targeting, and the need to reach objectives can break the formation. Use adjacency as the opening arrangement and as a reason for pairs to move together. When a dangerous area effect appears, space is worth more than a modest relationship bonus.

Treat personality reactions as a camp assignment log

Every adventurer also has a personality. Actions such as guarding camp, hunting for food, cooking, maintaining equipment, socializing, healing, taking damage, buying drinks, donating, enchanting gear, and sleeping in a tavern can raise or lower morale depending on that personality. Morale then affects energy gained in combat and recovery between fights.

This system makes camp tasks a diagnostic tool. When a reaction appears, record the cause rather than dismissing it as flavor. If one member likes maintaining equipment and another likes socializing, those assignments can protect durability and relationships at the same time. If a member repeatedly dislikes the chosen rest pattern, change their job before paying for morale recovery elsewhere.

Relationships can improve through camp socializing, tavern rooms, rounds of drinks, special events, and winning battles, with an additional benefit when everyone survives. That gives a new recruit a clear integration route: keep them beside the intended partner in manageable fights, use social time deliberately, and check the relationship readout before promoting the pair into the hardest contract.

Walk into a contract with a recovery budget

The Town Hall is where contracts are accepted and completed rewards are collected. Before taking one, reserve resources for the return rather than spending the last of the party’s gold in town. The party needs a way to heal, a way to restore damaged equipment, enough rations for the route, and enough uncommitted gold to react to a bad event or an injured member.

Use this departure check:

  1. Name the first combat plan. Identify the anchor, the first control action, and the damage source that follows it.
  2. Inspect durability and supplies. A weapon or armor failure can erase the benefit of a better stat line. Carry repair and healing supplies instead of assuming the next town will solve it.
  3. Read morale and energy bars. Rest if a key role cannot perform on the opening round. A full health bar does not compensate for an empty healer.
  4. Choose the abort signal. If the anchor is injured, supplies are exhausted, or the route produces a second unplanned fight, turn back before the loss consumes the next contract as well.

A contract is not profitable merely because its reward looks large. Subtract healing, repair, replacement equipment, food, and time. If the party returns unable to accept another suitable job, the route consumed campaign momentum.

A party fighting minotaurs in a dark tactical battle in The Adventurers
Use the turn order and visible status icons to protect the next essential action. Damage that ignores the coming enemy turn is often damage spent too early.

Make the Scout report change the first round

Enemy resistance information has value only if it changes target or damage type. When Scout exposes a resistance, do not continue the planned attack out of habit. Move the matching attacker to another target, use control instead, or create a weakness with an available debuff. A party with slash, pierce, and magical options is more adaptable than one that stacks a single attractive number.

Enemy behavior also changes the safe formation. Feral enemies tend to react to proximity or recent pressure; brutal enemies care about dangerous targets; tactical enemies prioritize support and ranged roles; strategic enemies evaluate threat, healing, damage, armor, and class. Treat those descriptions as expectations, then confirm the actual target choice in the current battle.

On each turn, protect the next required action:

  • If the healer acts late, control or body-block the enemy that can reach them.
  • If an exposed target is marked or weakened, move them before adding another damage buff.
  • If several enemies are adjacent, check every highlighted tile before confirming an area attack. Current combat permits area effects to hit allies.
  • If a character is down, treat the visible bleed-out state as the priority. Do not assume fleeing will rescue a dying member; secure a heal or finish the fight while the live timer still allows it.

After the fight, diagnose the cost. If the healer ended with health but no energy, the sustain plan needs recovery. If the anchor lost durability faster than health, the next purchase is maintenance rather than armor. If the intended pair separated immediately, the formation depended on terrain it did not have.

Use town stores as answers, not as a shopping circuit

Every shop fixes a different campaign problem. Visit the one that answers the last failure, then keep enough gold for the next contract.

  • Alchemist: buy finished potions, process flowers into essences, create potions, or pay to heal injured members. Use it when health and consumable recovery are the bottleneck.
  • Blacksmith: buy equipment, create gear, smelt or tan unwanted items, and repair damaged equipment. Repair a proven item before replacing the whole build.
  • Bowyer: browse bows and staves for ranged and magical users. Compare the resulting attribute and energy interaction, not only the damage line.
  • General Goods: restock healing supplies, repair materials, rations, and trade goods. This is the departure screen when the party is mechanically ready but logistically empty.
  • Enchanter: buy magical equipment or add enchantments to an item. Enchant a piece the build already expects to keep; do not pay to preserve gear that fails its core role.
  • Tavern: rest, recruit, buy a round, rent a room, or use the stables. It repairs people and relationships, not equipment.
  • Town Hall: take contracts, collect rewards, donate, and use the barbershop. Resolve completed work before financing another route.
The Fancy Hag enchanter menu in a prosperous town in The Adventurers
Town prosperity and reputation affect what the party can buy and what it pays. The store screen should confirm the benefit before you commit scarce gold.

Invest in one anchor town before funding the whole map

Town prosperity and town reputation are separate levers. Prosperity represents the settlement’s wealth and development; higher prosperity improves the chance of better shop goods and better Blacksmith crafting quality. It rises through donations, completed contracts, and trade wagons reaching towns safely. Reputation represents the party’s standing with that town and improves prices and crafting costs.

Choose an anchor town that overlaps the current contract route and the services your party actually uses. Complete work there, keep nearby roads safer when the opportunity is practical, and donate only after the expedition reserve is protected. The goal is not to maximize a rank immediately. It is to make the next recovery and equipment cycle cheaper and more reliable.

Switch the anchor only when the campaign route or party needs change. A distant prosperous town is not useful if reaching it consumes the supplies it would save. Conversely, a closer settlement with the right Alchemist, Blacksmith, Tavern, and contract flow can turn modest upgrades into several successful trips.

Use three readbacks before accepting the next contract

Progress is stable when three screens agree:

  1. Party readback: the essential roles have health, energy, morale, and usable equipment.
  2. Formation readback: the intended adjacent pairs show a relationship benefit worth preserving, and the new recruit is no longer treated as an instant replacement for a trusted partner.
  3. Town readback: the last contract improved reputation or prosperity, the required reward was collected, and the party still has a recovery reserve after shopping.

If one screen disagrees, fix that layer instead of changing the whole party. Low morale calls for different camp or social choices. Poor hit reliability calls for attributes, equipment, positioning, or an adjacent Thief benefit. Repeated energy failure calls for Resolve, recovery, lighter equipment, or a Druid pairing. A bad shop cycle calls for a better anchor town or a smaller purchase, not a riskier contract.

Release boundary: 1.0.0.0 on August 31, 2026

The Adventurers is Steam App 3062500, developed and published by Eternal Vigilance Entertainment. Steam lists the Windows 1.0 release on August 31, 2026 after an Early Access launch on November 11, 2024. The store describes a single-player, turn-based tactical RPG with party management, contracts, random events, towns, and an evolving open world.

The v1.0.0.0 notes are the mechanics boundary for this guide. They adjust Agility and Resolve, expose ally relationship bonuses in the combat stats view, change fort-request timing and rewards, add quest text, and expand modding. The two gameplay guides used here were published for the launch and updated on September 1. Recheck live tooltips if a later patch changes attributes, class abilities, relationship values, shop modifiers, enemy behavior, or contract economics.

The Adventurers on Steam · Official 1.0 release announcement