Start a new The Crust save with the Prologue. Version 1.0 rebuilt this scenario into a roughly 20-minute introduction, and the developer recommends it for first-time players before the story campaign. It teaches the surface, underground, power, drones, and construction in the order you need them. Sandbox gives you freedom before you know which part of the base is about to fail.
This guide covers version 1.0, which arrived on September 10, 2026. Older Early Access walkthroughs still explain the basic production chain, but their exact costs, quest choices, and research order are no longer safe instructions. Use the names, requirements, and objective text in your current game whenever they differ.
The first base has one job: keep its drones working
Your opening power grid needs generation, storage, and a way for drones to recharge. Place the Solar Panels, Batteries, and Charging Station requested by the Prologue, wire them into one grid, and connect that grid to the elevator. The elevator carries power to the underground level; a healthy surface grid with an unpowered elevator still leaves the machines below in the dark.
Do not spend the starting stockpile on a huge solar field. Steel, silicon, concrete, and more advanced parts are also construction materials for the machines that make replacements. Add enough generation to cover the running base, then add enough battery capacity and output to cross the lunar night. Hover over the power display and compare current generation, maximum consumption, and the battery state. A positive daytime number does not tell you whether the batteries can carry every active module after sunset.
The Charging Station belongs near the beginning of the build, not at the end of a power shortage. Construction, hauling, and mining all depend on drones with charged batteries. If the charge queue grows, add capacity or shorten unnecessary travel before ordering a large expansion. If drones are already running low, pause nonessential production and let them recharge while the powered drones finish the critical connection.
Mine a corridor, then clear room around the vein
Switch to the underground level and build the Drone Reconfiguration Module when the current objective unlocks it. Convert some construction drones into mining drones, but keep enough construction and hauling drones available for the machines you are about to place. When an excavation order sits untouched, check the module and make sure mining drones are actually assigned.
Regolith from the walls supplies the first concrete route. Iron and silicon are the early veins that matter because their products feed basic construction and electronics. Titanium and aluminum become important as the factory and campaign expand. The Ore Detector helps you find veins behind the walls, but scanning is power-hungry. Let the batteries charge, then rotate each scan into unexplored rock instead of firing repeatedly through the same patch. Start the excavation corridor once you have found a vein the factory needs.
A narrow tunnel reaches a vein quickly and then makes the extractor awkward to place. Clear the approach and several cells around the deposit. Version 1.0 improves the underground scanner by highlighting vein cells that can take an extractor, so use that placement view before committing the final excavation. Leave a straight side for the extractor’s output, a lane for conveyors, and access for a power line. A few extra cleared cells now are cheaper than rebuilding a crowded junction later.
Finish one production line before duplicating it
Your first automated line should take material all the way to something the base can use. Place a Regolith Extractor over the correct vein cells and aim its output toward open floor. Feed it into a Regolith Refinery, select the oxide recipe you need, then move that oxide into a Smelting Furnace set to the matching finished material. Keep the refinery’s slag output accessible; slag becomes useful later and a blocked by-product exit can stop an otherwise correct line.
Build the iron-to-steel and silicon routes as two readable chains before trying to share every belt. Watch each machine for a full cycle. Regolith should leave the extractor, the selected oxide should leave the refinery, slag should have somewhere to go, and the furnace should deliver steel or silicon to storage. If one stage fills while the next sits empty, the problem is between those two machines: check the belt direction, the selected resource, the recipe, and the input connector.
Version 1.0 adds production and consumption figures measured in in-game days and weeks. Use those numbers instead of copying old per-minute ratios. If a refinery produces more oxide than a furnace consumes, the buffer will grow and tell you where another furnace could help. If the refinery waits for regolith, another furnace only adds power demand. The game also marks resources stuck at Distributors and module inputs, which turns a silent jam into a specific belt or filter to inspect.

Use Planning Mode before the construction drones arrive
Planning Mode is one of the most useful 1.0 additions for a new base. Lay out modules and conveyors first, copy a working module together with its recipe, and read the required-resources tracker before you let the drones build it. That shows whether an expansion is a real production upgrade or a field of holograms waiting for the same missing parts.
Plan in blocks that can grow in one direction. Put the extractor and refinery near the vein, keep smelting and manufacturing where several inputs can reach them, and leave one side of each block open. A small storage buffer between stages is useful when it reveals which material is accumulating. A row of oversized storage can hide a slow refinery behind a huge buffer while consuming the materials needed for the next machine.
Check every conveyor’s arrows before approving a long run. In the 1.0 construction and planning interface, the direction is visible and can be reversed with the control shown for that action; hotkeys can also be customized in Settings. You can now choose the resource used by an input or output connection without demolishing the module and its belts. That makes a wrong recipe easier to repair, but the belt still needs a valid destination and enough throughput.
Do not make one belt responsible for every solid resource just because filters exist. Steel and silicon deserve dependable paths because so many early buildings need them. Slag needs an exit. High-value manufactured parts should reach a visible buffer rather than circle the whole factory. A short line with one purpose is much easier to expand than a clever loop whose filters you cannot read after an hour away from the save.
Research the next missing connection
The research tree is wide, but the early base only needs the technology that removes its current block. If you cannot locate the next iron or silicon vein, work toward the Ore Detector and its prerequisite. If drones are carrying everything by hand, unlock the conveyor tier the current line needs. If the campaign asks for plates, components, or concrete faster than the starter equipment can provide them, follow the live dependency path to the Rolling Mill, Components Factory, or Smart Concrete Factory.
Keep one research project active, but do not buy an entire branch because it looks useful later. Read the next campaign objective, inspect the locked building it names, and trace that building back through the current tree. Research positions and costs changed during Early Access, including just before 1.0, so an old sequence can spend points on a building that does not solve today’s shortage.
Power upgrades are a good example. More Solar Panels help when daytime generation is too low. More battery capacity helps when the base runs out of stored energy before sunrise. Higher battery output or a later constant generator helps when storage remains but the grid cannot release power fast enough. Check which value is failing before choosing the next energy technology.
Treat the Landing Platform as a production test
When the campaign points you toward the Landing Platform and contracts, pause before spending the last of your concrete and metal. The useful checkpoint is not the finished platform by itself. You want repeatable steel, silicon, concrete, and any manufactured part named by the current objective, with enough power to keep those lines running.
Stage contract goods before sending them. A large delivery can compete with construction for both materials and drone time. Keep a reserve for repairs, power, and the machine that produces the next shipment. If builders suddenly stop after you accept a contract, open the transport and priority panels before placing more drones; the active shipment may be pulling the same resource or taking the highest hauling priority.
The Rover and Cargo Truck move the campaign beyond the base. Send a repaired vehicle out through the World Map, select the marked point of interest, and use the mission’s current transport requirements. Do not dispatch the only vehicle without checking its load and the return trip. The 1.0 interface can split an expedition across several trucks or trips when one vehicle lacks space, so use that option instead of stripping the factory for an oversized single load.

Colonists need a base, not a spare room
Factory automation gets you to the Living Quarters stage; it does not make the habitat ready. Reserve a separate underground area with room for walls, doors, power, and life-support modules. An ice vein nearby shortens the water route, but a clean expansion area is more important than forcing the room into a cramped corner of the factory.
Before people arrive, trace the whole support chain from the water source through the life-support modules named by the current objective. The room needs oxygen, food, electricity, and a safe entrance as well. A powered wall panel does not make the air breathable, so open the habitat and resource panels and confirm that supplies are moving instead of sitting in a distant warehouse.
Version 1.0 makes hygiene, medicine, salary, and morale part of the operating plan. Showers and toilets lower epidemic risk, while a positive medicine balance gives you another layer of protection. Lower salaries can damage morale, and colonists can leave on a later capsule if conditions become bad enough. Hire for jobs you can support and expand the habitat before the next group, rather than solving a labor shortage by creating a housing and life-support emergency.
When the base stops, trace one missing input
- No mining orders move: open the Drone Reconfiguration Module, confirm that mining drones exist, and check that the excavation or vein is reachable.
- A machine has power but produces nothing: verify its recipe, then look at the named inputs. Follow the missing material one belt upstream.
- A conveyor is full at a Distributor: inspect the direction, resource filter, and priority on the blocked branch. Use the 1.0 stuck-resource indicator to find the exact junction.
- The grid dies after sunset: pause nonessential modules, keep the elevator and Charging Station alive, then compare battery charge, capacity, and output with maximum consumption.
- Construction stalls during a contract: check whether the shipment reserved the same stock or redirected the haulers. Finish, reduce, or postpone the delivery before ordering more buildings.
- The next objective needs a part you cannot make: hover over the missing part in the objective or building panel, find the module that produces it, and research only the dependency path that reaches that module.
Your first base is ready to move on when steel, silicon, and concrete replenish without manual hauling, the drones recharge without a queue swallowing the workforce, and the power grid survives a normal night with room for one more essential module. At that point the Landing Platform, expeditions, contracts, and colonists become new branches of a working economy instead of four more demands on a stockpile that is already empty.