We Were Here Tomorrow Beginner Guide: Goop and Hook

Two Explorers with prototype equipment in We Were Here Tomorrow.

When a ledge or a lever stops you in We Were Here Tomorrow, try the Goop and Hook Guns together before hunting for another switch. A Goop block can give you somewhere to climb, occupy a pressure pad or give the Hook player a target above the floor. The Hook can keep hold of a handle after the Explorer who pulled it lets go. Those combinations matter as soon as you recover the prototypes.

The Goop Gun: shoot, aim and recall

In the Prototype Room, the PC tutorial introduces three Goop controls: left mouse button to shoot, hold left mouse button to aim, and Q to recall. Try them while the block is in plain view. Aim before placing it in a small opening; use recall when you need to remove a misplaced cube.

The PC tutorial shows Q to recall the Goop block.
Q recalls the block during the PC tutorial. Gameplay still: fgw.

Recall is worth learning before you build anything your partner needs. A block under their feet, on a pressure pad or in use as a Hook target is still doing a job. Tell them which block you intend to remove and let them get clear first. Otherwise, a correctly placed cube can disappear just as they try to use it.

To climb, place a block where you can reach its side, then climb onto it and look for the next ledge. If a Goop stack seems climbable but your Explorer refuses to get up, walk around it and try another side. Tight clearance between the Explorer, the stack and nearby scenery can stop the climb from one direction. Change your approach before rebuilding the whole stack.

Pressure pads and square wall fittings

At the raised pressure pad in the Prototype Room, look for the marked positions on top. Have one Explorer stand on one marked position and place a Goop block on the other. Aim the cube onto the pad, within the unoccupied outline. Once the cube is resting on the pad, check that both marked positions remain occupied. Have your partner stay on their marked spot while you check the placement, so you can see what the cube changes without also removing the Explorer’s weight.

A placed Goop cube occupies the pressure pad beside the other Explorer.
A placed Goop cube occupies the pressure pad beside the other Explorer. Gameplay still: fgw.

Wall fittings need a more precise shot. Look up as well as across the floor: one square fitting in the prototype area sits high on the wall, with a blue cable running away from it. Aim at the square opening and place the block there. After the shot, look back at the fitting to see whether the cube actually landed inside it. Repeatedly firing from the same angle is little help if the block is catching on the surrounding wall.

A square wall fitting connected to a blue cable above the prototype room.
Check the high square fitting and its cable when floor-level placements do nothing. Gameplay still: fgw.

Keep the pad and wall fitting separate in your callouts. Saying “the cube is in” leaves your partner guessing which mechanism you mean. “Cube on the pad” or “cube in the high wall square” tells them where to look before either of you changes another placement.

Let the Hook take over a handle

After recovering the prototypes, you return to rooms containing horizontal yellow handles on machinery. Pulling one by hand can leave an Explorer occupied at the machine. The Hook player can attach to the handle’s end and keep it held, allowing the person who grabbed it to move away.

  1. Have one Explorer grab and pull the horizontal handle.
  2. The Hook player aims at the exposed end and attaches the Hook. Look for the visible hand and purple line gripping it.
  3. The Explorer holding it by hand lets go. Check that the handle remains held and the doorway stays open.
  4. Cross through the open doorway, then tell the Hook player when you are clear.
A purple Hook line grips the end of a horizontal yellow handle.
The Hook grips the handle’s end while the other Explorer holds it by hand. Gameplay still: fgw.

If the handle springs back when you let go, have the Hook player aim again at its end while you keep holding it. Wait until you can see the Hook gripping the handle, then release your own grip. Leave the other controls alone during this handoff; otherwise, a second change can obscure whether the Hook kept the handle in position.

Goop can give the Hook somewhere to go

The square wall panels after the prototype tutorial show how the tools work together. The Goop player places a block in a raised square panel; the Hook player then attaches to that block. A high panel that seems out of reach from the floor becomes useful once the other Explorer supplies the target.

The Hook player aims at a Goop block inside a square wall panel.
A Goop block in the raised panel gives the Hook player a target. Gameplay still: fgw.

For this combination, let the Goop player finish placing the cube before the Hook player fires. The Hook player should say when they have attached and when they have reached somewhere they can stand. Wait for that second call before recalling or repositioning the cube. Removing it merely because the Hook has connected is too early.

The two Explorers may need different ways onto the same raised area. Look for cabinets and climbable surfaces around the square panels, as well as places where a Goop block can add a step. If the Hook player gets up first, the Goop player should still inspect the lower route rather than repeatedly trying to imitate the grapple.

Describe the grid before entering an answer

Some early puzzles depend on passing a pattern between separated viewpoints. With the four-by-four light grid, agree that rows run from top to bottom and columns from left to right. Read the white light in each row using those coordinates. In the picture below, the white lights are in columns two, three, one and three, starting with the top row.

A four-by-four grid has a white light in columns two, three, one and three from the top row down.
Read this grid from the top row down, counting columns from the left. Gameplay still: fgw.

That sequence describes this image; read the display in your room before using it as an answer. Have your partner repeat the row positions before operating their controls. If a light changes, report its row and column so you can distinguish a changed display from a misheard number.

When the walkie-talkie goes quiet

On PC, the tutorial shows right mouse button held down to use the walkie-talkie. Release it when you finish speaking. Both players holding their talk buttons together can prevent them from hearing each other, so leave a pause for the reply before deciding voice chat has failed.

If there is still no sound, select the intended microphone as the Windows default and choose that same device in the game’s audio settings. Check microphone volume in both places, then test the microphone in another app. The developer also suggests inviting your partner directly with Invite a Friend if creating a room leaves voice communication broken. These checks are particularly useful before attempting another separated grid or symbol puzzle.

Saving progress and selecting a checkpoint on Xbox

Before quitting, finish the puzzle and enter the next room when possible. The developer explains that most puzzles save progress at that point, so stopping halfway through an input sequence may leave that puzzle unfinished when you return.

For Xbox, the documented recovery path is to have the host return to the main menu, choose Change under the current journey, select Start New Journey, then select the desired checkpoint. If the checkpoint tiles cannot be selected, try swapping hosts. The developer identifies the wrong player hosting as a common reason those tiles are unavailable.

Use the developer’s illustrated checkpoint instructions to locate the Xbox menu controls. Choose the latest available checkpoint you reached together before replaying the opening.