Complete the lodge’s white-tailed deer tutorial, travel to Colorado, and finish “A matter of rabbits” before tackling “White-tailed sightings”. In Hunting Simulator 3, the rabbit contract needs three recovered cotton-tails. For the deer survey, enter its marked area first, then inspect three White-Tailed Deer need zones. Shooting deer does not advance that survey objective.
This route follows ShredhedGaming’s launch-day PC recording, played with a controller on Ranger difficulty. Scout and Ranger provide the visible tracking assistance used below. Forest Warden removes tracking assistance and spotting information, so identifying the same signs is harder on that setting.
Finish the white-tailed deer tutorial
Follow the instructor into the lodge and use the laptop to buy the white-tailed deer hunting license when prompted. The tutorial purchase is free. Having a rifle does not replace this step: the instructor first checks that you are licensed to harvest the animal.

At the loadout bench outside, choose the free Model 70 Coyote Light rifle in a weapon slot. Open its modifications, fit the Prime 3-9×40 Riflescope, and select .243 Win ammunition. The caliber step is separate from equipping the rifle and scope, so select .243 Win before leaving the bench.
Follow the instructor to the deer signs. Inspect the droppings and footprints, then hold the Track interaction on the deer trail. When you inspect the tracked deer’s footprints, their markers change color and the GPS records them. Take out the GPS through the item wheel and use those inspected marks to follow the trail. Continue inspecting new footprints as you move, so the device has a trail to display.

The route leads to a hunting blind overlooking a clearing. Enter it when the instructor asks, locate the white-tailed deer at the far end, and use the scoped rifle for the shot. Wait until the deer presents a clear view of its chest. Use the game’s aim and breath controls shown for your input device; the controller prompts in the recording should not be read as keyboard bindings.
Go to the fallen deer and interact with it to open the harvest inspection. The screen shows the animal, weapon, caliber, shot distance and organs hit, with an X-ray of the bullet path. Reveal its animal score, then review the separate Hunt score. These panels let you distinguish the quality of the animal from how you took the shot.
Save the tutorial deer as a trophy when instructed. Back at the lodge’s trophy stand, select a composition that includes a white-tailed deer, choose the deer slot, then select the animal you saved. If the stand is still empty, check both choices: a suitable composition creates the place for the animal, and selecting your saved specimen fills it.

Move to Colorado and prepare the rabbit loadout
Finish the instructor’s remaining introduction outside, then use the helicopter to choose Colorado. The shooting range north of the headquarters lodge is available if you want to practice first. Colorado starts a different sequence from the headquarters deer lesson: its opening contract, “A matter of rabbits”, sends you after cotton-tail rabbits.
Enter the Colorado lodge and use its laptop for licenses. Select Cotton-Tail Rabbit and check the permitted ammunition shown for that species. Buy that license before leaving. Keep cotton-tails separate from other rabbits you encounter: a later jackrabbit encounter in the same session triggers a red “No license” warning even though the cotton-tail contract has already been completed.
Return to the loadout bench and equip the Ultraleggero break-action shotgun with 12G Birdshot. This setup clears the contract’s appropriate-caliber objective in the recorded run. Open the shotgun’s modification menu to select its ammunition. Changing a rifle’s ammunition while leaving the shotgun unprepared will not produce the same loadout.

The player also buys the Ibex Medium Backpack – Green Moss from the wardrobe, which makes room for the rifle and shotgun together. That purchase is useful if you want both weapons on the outing. The rabbit contract’s equipment requirement concerns the appropriate caliber; you can concentrate on the shotgun in an available weapon slot instead of treating the backpack as a rabbit-hunting objective.
You can take a dog from the kennel before leaving. Open the companion selection there, select the dog and confirm taking it out. The player brings a Bluetick Coonhound, but completes the rabbit pickups by hand. You can inspect the burrow and recover all three rabbits yourself while your dog accompanies you.
A matter of rabbits: inspect the burrow, then bag three
Follow the contract marker to the hunting tower near Horseshoe Lake. Arriving there changes the task to inspecting one Cotton-Tail Rabbit need zone. Search the grass around the tower for a small burrow: it is a low mound of bare earth with a dark hole. Approach until you can inspect it. Merely looking through binoculars at a rabbit in the field leaves this inspection step unfinished.

Inspecting the burrow reveals a Cotton-Tail Rabbit eating zone and changes the objective to “Bag 3 cotton-tail rabbit”. The tower gives you a view over the nearby grass, where the recording shows several rabbits moving between patches of cover. Use your binoculars to find a rabbit, switch to the shotgun, and wait for a shot with a clear view of the animal. You do not need to change back to the tutorial rifle for this task.
After each shot, go to the rabbit and open its harvest screen. Reveal the result and choose Sell to finish the recovery, as the player does in this route. Then check the contract counter before looking for the next animal. It rises from 0/3 to 1/3, then 2/3 and 3/3 after the respective harvests are processed. A rabbit lying on the ground is still a pickup you need to finish.
If you lose sight of a fallen rabbit, return to the grass patch where it was standing and search at ground level. On the assisted setting used here, fallen animals can be highlighted. Keep the recovery near the shot location in mind before aiming at another rabbit, since several small animals can move through the same field.
The third processed cotton-tail completes “A matter of rabbits” and awards 500 in the recorded build. The tracker then changes to “White-tailed sightings”. At that point, stop shooting rabbits for contract progress and read the new destination. More cotton-tails will not satisfy the next survey.

Enter the marked area for White-tailed sightings
Go to the area marked for white-tailed deer sightings near the lodge. This contract begins with a location objective. If the tracker still says “Reach the area of the white-tailed deer sightings near the lodge”, you have not advanced to the inspections yet. Finding deer elsewhere, harvesting one, or discovering an unrelated zone does not replace reaching that area.
Open the map and locate the contract’s yellow search area. Use the quest marker to get into it, then watch for the objective to change to “Inspect 3 White-Tailed Deer need zones”. If the travel instruction remains, keep heading toward the quest marker. Begin looking for need zones once the inspection counter appears.

Inspect three deer zones without searching for three types
Find and inspect three separate White-Tailed Deer need zones. You do not have to find one eating zone, one drinking zone and one resting zone to reproduce the recorded completion. ShredhedGaming’s launch-day run reaches 3/3 with a resting zone, a drinking zone and another resting zone. If you are stuck at 2/3 while searching only for an eating zone, inspect another deer resting area when you find one.
Start with the ground signs around the woods and grassy openings. Resting areas appear as disturbed, flattened patches of ground, sometimes with exposed branches around them. Move close and inspect the patch rather than relying on a distant animal call. Check that the discovery names White-Tailed Deer and that the contract counter increases. A footprint can help you follow a deer, but the survey asks for its need zones.

Search waterside ground for drinking signs as well. In the recorded run, inspecting a White-Tailed Deer drinking zone raises the counter to 2/3. The discovery appears on screen, so you can distinguish a qualifying deer zone from nearby signs left by ducks or other wildlife. Use the map’s discovered markers to keep track of areas you have already checked while moving between the shore and the surrounding cover.

At 2/3, continue looking for another deer need zone, including another resting area. In the final discovery shown here, a resting patch on open grassy ground advances the counter to 3/3. The two resting-zone discoveries are separate locations. That combination completed this launch-day contract. Use each discovery label and counter increase to follow the same task in your save.

When the survey counter will not move
Read the discovery’s species before leaving the sign. The same outing shows the player inspecting a Mourning Dove resting zone and a Common Pheasant eating zone while the deer survey stays at 2/3. Both are real need-zone discoveries, but neither belongs to the species requested by this contract. Return to deer signs instead of counting every new map icon toward the three.
If the tracker still shows the earlier travel instruction, go back to the marked search area first. Once the inspection counter appears, move on from zones you have already checked and inspect another deer need zone at close range. If you have been taking deer shots while that counter stays unchanged, switch back to surveying: the active requirement is inspecting zones.
After 3/3, the recorded contract completes and awards 600. The next task, “First white-tailed”, asks you to spot one White-Tailed Deer using binoculars or rangefinders. Equip those optics and identify a deer before assuming the next objective is another harvest.